April 8, 2016 NHTSA CAMPAIGN NUMBER: 16V199000
Corrosion of the Battery Cable at the Alternator
The corrosion may result in the battery positive cable overheating, increasing the risk of a fire.
NHTSA Campaign Number: 16V199
Manufacturer Bugatti![]()
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 13
Summary
Bugatti
is recalling certain model year 2006-2008 Veyron vehicles manufactured October 3, 2006, to December 22, 2006. In the affected vehicles, the positive battery (B+) cable and the connection to the alternator may corrode.
Remedy
All affected vehicles have had the battery B+ cable and the alternator replaced, free of charge. Owners may contact Bugatti
at 1-805-557-1050.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Technical Bulletin
16‐04‐011BUG
Generator
Applicability:
Bugatti
Veyron
VIN range :
Contact your Bugatti
regional service manager
Market Region:
All
Introduction:
Corrosion of the B+ Cable and connection to the generator.
Description:
In extreme conditions, cable protection could be damaged.
Installation of latest level generator and improved B+ cable to avoid water ingress and therefore remove the risk of corrosion.
This repair can be done by any Bugatti
Service Partner of Excellence or assisted by the factory directly.
Warning:
Comply with the vehicle preparation measures for maintenance and repair procedures. Refer to the official Workshop Manual, Page 18 “General instructions about the vehicle”
If in any doubt regarding this procedure, contact your Bugatti
regional service manager.
Procedure:
The main parts requiring replacement: Generator / Generator wiring Harness B+ / Bracket.
Listed below are the new parts which are required:
| Designation | Old Part Number | New Part Number |
|---|---|---|
| Generator | 07E.903.015 | 07E.903.015.A |
| Generator wiring harnes | 5B0.971.349 | 5B0.971.349.B |
| Generator bracket | 5B0.972.597 | 5B0.972.597.B |
| Screw M8x95x80 | N.906.602.02 | N.911.607.01 |
| Screw M8x115x80 | N.906.602.02 | N.911.608.01 |
| Nut M8 | N.901.838.02 |
Further parts needed to complete the repair work will be provided by Bugatti
in a repair kit.
For all replacement work details, refer to the official Workshop Manual for Service Partner of Excellence, Page 138 “Generator, removing and installing” and, page 175 for “Replacing the generator wiring harness”.
The generator fixing screws must be replaced with the longer type. Please refer to table above.
Warranty information:
| Operation | Defect Code | Repair Code | Time |
|---|---|---|---|
| Generator replacement | BUGVR13/1 | 60 hrs |
«Title» «FirstName» «FamilyName»
«FloorRoom»
«NameNo»«Street»
«POBox»
«AreaDistrict»
«TownCity» «CountyState» «PostZipCode»
«Country1»
April, 19th 2016
This notice applies to your vehicle,
Vehicle Identification Number (VIN): «VIN1»
SAFETY RECALL
- Reference Point System (RPS) Plates
- Fuel level indication
- Alternator
«FormalSalutation»
You may have seen that Bugatti
Automobiles S.A.S. has recently announced several campaigns, related to vehicle safety issues which may occur on certain 2006‐2014 model year Bugatti
vehicles.
We are writing to reassure and to inform you that our records show that your vehicle is to the latest specification and that these campaigns are not applicable to your vehicle.
If you have any questions or require any assistance please contact your Authorised Bugatti
Partner or dedicated Flying Doctor.
«Partner»
«Adresse_Partner»
«ZIP» «Country»
«Name_contact_partner» «Tel_Partner»
«ASM» Tel: «Number_ASM» email: «Mail_ASM»
Bugatti
Automobiles S.A.S. would like you to know that we sincerely appreciate your continued support of our cars and I apologise for any inconvenience the recall announcement may have caused.
Yours Sincerely,
Chris Kelly
Aftersales Director
Chronology :
In Middle 2006 corrosion on B+ found on test vehicles during endurance tests.
End of 2006 Analysis conducted and concluded.
Jan 2007 production fix implemented
In August 2008 the replacement parts and documentation were ready. Nothing had been reported in the field but decision made that all cars should be brought to the latest specification in the field.
3 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| BUGATTI | VEYRON | 2006-2008 |
5 Associated Documents
Defect 573 Report
RCLRPT-16V199-6649.PDF 29.639KB
Recall Acknowledgement
Remedy Instructions and TSB
RCRIT-16V199-4065.pdf 410.749KB
Owner Notification Letter(Part 577)
RCONL-16V199-4654.pdf 97.801KB
Recall Quarterly Report – 2016-Q2
RCLQRT-16V199-8525.PDF 214.489KB
Latest Recalls Documents
- MEET THE GENIUS1 — Similar to our G750, just better. It's 35% smaller and delivers over 35% more power. It's the all-in-one charging solution - battery charger, battery maintainer, trickle charger, plus desulfator.
- DO MORE WITH GENIUS — Designed for 6-volt and 12-volt lead-acid (AGM, Gel, SLA, VRLA) and lithium-ion (LiFePO4) batteries, including flooded, maintenance-free, deep-cycle, marine and powersport batteries.
- ENJOY PRECISION CHARGING — An integrated thermal sensor dynamically adjusts the charge based on ambient temperature, preventing overcharging in hot weather and undercharging in cold, ensuring optimal battery performance.
- CHARGE DEAD BATTERIES — Charge batteries from as low as 1 volt, or use Force Mode to manually charge completely dead batteries down to zero volts. Perfect for recovering deeply discharged or neglected batteries.
- BEYOND MAINTENANCE — Keep your battery fully charged without worrying about overcharging. Our smart charger constantly monitors the battery, allowing you to leave it connected safely - indefinitely - for worry-free maintenance.
- 3-in-1 Smart Car Battery Charger: This 15A 12V car battery charger comes with a compact size and super fast charging, suitable for all 12V lead-acid batteries (including AGM, GEL, SLA, VRLA, etc.) and LiFePO4 lithium batteries. Charging, maintaining, and trickle charging modes for cars, motorcycles, trucks, boats, and more. Please note: this is a car battery charger and please connect it to a power source before use. (Please do not let the charger operating unattended for more than 12 hours.)
- Plug and Play Operation: Simply connect the clamps to your car battery. The LCD screen will light up and automatically display the battery voltage and ambient temperature. This automatic car battery charger gets to work the moment you plug the AC power cord into a 110-240V (50-60Hz) wall socket, it will automatically detect and charge. You can also manually select from 6 using modes with the press of the “MODE” button.(Input cable length: 102 cm; output cable length: 60 cm.)
- Smart Winter Battery Trickle Charger: This intelligent car battery charger features dual seasonal modes (Winter/Summer) that automatically adjust charging voltage based on ambient temperature, helping prevent undercharging in winter and overcharging in summer. This ensures battery health whether your vehicle is in daily use or stored for months.
- LCD Display: Battery charger comes with a LCD screen shows charging data including voltage, current, battery level, ambient temperature, and seasonal modes (summer/winter), making it easy to stay updated on charging progress.
- Battery Maintenance & Recovery: This smart battery charger features a dedicated pulse repair mode, detects and reverses battery salvation and acid stratification in lead-acid batteries, extending battery life and functionality.
- Charger, Maintainer & Desulfator - An all-weather battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for charging and maintaining all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell).
- Automatic Desulfation & Optimization - Automatic detection of battery sulfation problem. Applying with pulse current technology to desulfate the batteries effectively. Optimize the battery performance during charging without any manual operation.
- Energy Saving & Spark Free - Zero output in standby mode. No battery drain when connecting with the battery. Spark proof during lead connection for safety.
- Multi-level Safety Protection & Timer Set Up - Overcharge, short circuit and reverse polarity protected. Charge the battery up to 14.4V and Maintain the battery at 13.6V for long time to avoid gasing and to extend the battery life. 24-hour Timer is set up in the program to terminate the charge and enter the maintaining mode once the voltage is above 14V to ensure safety.
- Easy Operation -Just plug-in, connect to the battery and start charging or maintaining your battery. The desulfation is working automatically during the charing. No manual operation.
- PREVENT BATTERY FAILURE: Ensure reliable starts after storage with this 4-in-1 device that charges, maintains, tests, and restores batteries for cars, motorcycles, ATVs, trucks, SUVs, and boats.
- REVIVE DEAD BATTERIES: Delivers 15A rapid charging power to keep standard, AGM, gel, and deep-cycle batteries healthy, making it the perfect garage upgrade for seasonal or infrequently used vehicles.
- EASY OPERATION: Microprocessor controlled with auto voltage detection and smart trickle charging technology for a seamless charging experience.
- MULTI-FUNCTION VALUE: Maximize battery life and performance with advanced desulfation mode, automatic voltage detection for 6V and 12V batteries, and multi-stage charging algorithms.
- COMPLETE PACKAGE: Includes (1) SC1280 Battery Charger and Maintainer, (1) user manual
- Efficient, Energy-Saving, and Fast Charging: The TowerTop 12v battery charger offers 4 adjustable current settings (2A/10A/25A/AUTO) to meet your diverse needs. With a max charging current of 25A, you can fully charge a 100Ah battery in under 3.5 hours. Achieving an 85% charging efficiency (industry average 75%), this battery chargers is more efficient, increasing charging speed by 1640% compared to 2A car battery charger. Not only is it energy-efficient, but it also saves you a lot of wait time
- Fully Automatic Charging for Convenience and Safety: This 12 volt battery charger automatically detects battery status and starts charging automatically within 30 seconds if you forget to press Start. After a full charge, it enters pulse repair mode, turns off the screen to save energy, and maintains a safe voltage for long-term storage. If voltage drops, it restores full power. The smart battery charger also remembers your last settings, ensuring seamless operation even after a power outage
- All-in-One Compatible Design: Designed for 12V sealed lead-acid batteries in cars, boats, RVs, power sports, and deep-cycle batteries, including 12V STD, AGM, GEL, Wet, MF, EFB, calcium and deep-cycle batteries
- HD LCD Screen and 8-Stage Intelligent Charging: With true 8-stage smart charging (desulfurization, soft start, bulk charge, absorption, analysis, repair, float, and pulse maintenance), it optimizes battery life and repairs batteries without overcharging or damaging them. The HD LCD screen allows you to view the charging stage and parameters at any time rather than leaving you guessing, keeping you informed of the charging status
- Battery Repair: Independent desulfurization and repair buttons allow you to manually desulfurize and repair your battery to restore lost battery performance, helping to revive old/idle batteries and extend battery life. If your battery cannot be charged, you can try the "repair" mode to fix it. Note: It cannot repair completely drained batteries
SEOCONTENT-START
Technical Bulletin 16‐04‐011BUG Generator April 2016 Page 1 of 3 Revision 1 Applicability: Bugatti
Veyron VIN range : Contact your Bugatti
regional service manager Market Region: All Introduction: Corrosion of the B+ Cable and connection to the generator. Description: In extreme conditions, cable protection could be damaged. Installation of latest level generator and improved B+ cable to avoid water ingress and therefore remove the risk of corrosion. This repair can be done by any Bugatti
Service Partner of Excellence or assisted by the factory directly. Warning: Comply with the vehicle preparation measures for maintenance and repair procedures. Refer to the official Workshop Manual, Page 18 “General instructions about the vehicle” If in any doubt regarding this procedure, contact your Bugatti
regional service manager. Technical Bulletin 16‐04‐011BUG Generator April 2016 Page 2 of 3 Revision 1 Procedure: The main parts requiring replacement: Generator / Generator wiring Harness B+ / Bracket. Listed below are the new parts which are required: Designation Old Part Number New Part Number Generator 07E.903.015 07E.903.015.A Generator wiring harnes 5B0.971.349 5B0.971.349.B Generator bracket 5B0.972.597 5B0.972.597.B Screw M8x95x80 N.906.602.02 N.911.607.01 Screw M8x115x80 N.906.602.02 N.911.608.01 Nut M8 N.901.838.02 Further parts needed to complete the repair work will be provided by Bugatti
in a repair kit. For all replacement work details, refer to the official Workshop Manual for Service Partner of Excellence, Page 138 “Generator, removing and installing” and, page 175 for “Replacing the generator wiring harness”. New Bracket 5B0.972.597.B New Generator 07E.903.015.A The generator fixing screws must be replaced with the longer type. Please refer to table above. Technical Bulletin 16‐04‐011BUG Generator April 2016 Page 3 of 3 Revision 1 Warranty information: Operation Defect Code Repair Code Time Generator replacement BUGVR13/1 60 hrs Bugatti
Bulletins are intended for use by experienced and trained technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to an Authorised Bugatti
Partner. See your Bugatti
Partner for advice on whether your vehicle may benefit from the information contained within this document. The information contained in this Bulletin is accurate at the date of publication. However, Bugatti
Automobiles S.A.S. regularly updates technical information. Please check with your Bugatti
Partner that the Bulletin you intend to use contains the latest available information. Bugatti
Automobiles S.A.S. All Rights Reserved
**************************************************************************************************************
Bugatti
Automobiles S.A.S. 1, Château Saint Jean, Dorlisheim, F-67120 Molsheim Tel. : +33(0)3.88.04.56.00, Fax : +33(0)3.88.04.56.29 Président : Wolfgang Dürheimer RCS : SAVERNE.NO B433873437, Identifiant TVA FR 21433873437 Capital social : 22.000.000 EUR IBAN : DE 66 2694 1053 0685 597700 «Title» «FirstName» «FamilyName» «FloorRoom» «NameNo»«Street» «POBox» «AreaDistrict» «TownCity» «CountyState» «PostZipCode» «Country1» April, 19th 2016 This notice applies to your vehicle, Vehicle Identification Number (VIN): «VIN1» SAFETY RECALL – Reference Point System (RPS) Plates – Fuel level indication – Alternator «FormalSalutation» You may have seen that Bugatti
Automobiles S.A.S. has recently announced several campaigns, related to vehicle safety issues which may occur on certain 2006‐2014 model year Bugatti
vehicles. We are writing to reassure and to inform you that our records show that your vehicle is to the latest specification and that these campaigns are not applicable to your vehicle. If you have any questions or require any assistance please contact your Authorised Bugatti
Partner or dedicated Flying Doctor. «Partner» «Adresse_Partner» «ZIP» «Country» «Name_contact_partner» «Tel_Partner» «ASM» Tel: «Number_ASM» email: «Mail_ASM» Bugatti
Automobiles S.A.S. would like you to know that we sincerely appreciate your continued support of our cars and I apologise for any inconvenience the recall announcement may have caused. Yours Sincerely, Chris Kelly Aftersales Director
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 16V-199 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Bugatti
Submission Date : APR 07, 2016 NHTSA Recall No. : 16V-199 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Bugatti
Address : 1 Chateau St Jean Dorlisheim, France 00 67120 Company phone : 999 Number of potentially involved : 13 Population : Estimated percentage with defect : 100 Vehicle Information : Vehicle : 2006-2008 Bugatti
Veyron Vehicle Type : LIGHT VEHICLES Body Style : 2-DOOR Power Train : GAS Descriptive Information : Corrosion of the B+ Cable and connection to the generator Production Dates : OCT 03, 2006 – DEC 22, 2006 VIN (Vehicle Identification Number) Range Begin : VF9SA15B36M795001 End : VF9SA15B66M795042 ✔ Not sequential VINs Description of Defect : Description of the Defect : Corrosion of the B+ Cable and connection to the Alternator FMVSS 1 :NR FMVSS 2 :NR Description of the Safety Risk : No incidents report in the field. However in extreme conditions, the cable protection could be damaged and in presence of burnable product could lead to potential fire Description of the Cause : Corrosion reduces the electrical power output of the generator that could be transferred into heat in the cable Identification of Any Warning that can Occur : NR Part 573 Safety Recall Report 16V-199 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : Bugatti
Address : 1, Chateau St Jean Molsheim FOREIGN STATES 67120 Country : France Chronology : In Middle 2006 corrosion on B+ found on test vehicles during endurance tests. End of 2006 Analysis conducted and concluded. Jan 2007 production fix implemented In August 2008 the replacement parts and documentation were ready. Nothing had been reported in the field but decision made that all cars should be brought to the latest specification in the field. Description of Remedy : Description of Remedy Program : On affected vehicles the Alternator will be replaced and B+ Cable ammended to avoid water ingress and therefore reduce corosion. Official Bugatti
Partners to do the work. Bugatti
will cover all the costs involved for the repair (no time or Km limit) How Remedy Component Differs from Recalled Component : Latest level Alternator with new part number and B+ cable amended to avoid water ingress and therefore reduce corrosion Identify How/When Recall Condition was Corrected in Production : In January 2007 with introduction of LEV2 engine from MY2008 in production. Coincides with change from LEV1 to LEV2 engines. Recall Schedule : Description of Recall Schedule : All Vehicles have been remedied Planned Dealer Notification Date : NR – NR Planned Owner Notification Date :NR – NR * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.






